Combining Skiving Burnishing Machine

Combining Skiving Burnishing Machine

Combining Skiving Burnishing machine The GG2120 CNC deep hole scraping and rolling machine adopts the processing method of workpiece fixed and tool rotary feed. Mainly composed of bed, positioning seat, workpiece bracket, workpiece holder, oil feeder, mast bracket, mast box, feed system, cooling......

Send Inquiry

Combining Skiving Burnishing machine
The GG2120 CNC deep hole scraping and rolling machine adopts the processing method of workpiece fixed and tool rotary feed. Mainly composed of bed, positioning seat, workpiece bracket, workpiece holder, oil feeder, mast bracket, mast box, feed system, cooling system, hydraulic system, CNC control system and other components.
The boring hole diameter range is : 38-200mm. And working length is:8000mm.(This parameter is for Model GG2120x8000mm).

Product description:
1. Bed: The machine bed is made of integral casting bed, aging treatment, double rectangular guide rail, good rigidity and large carrying capacity.
2. Positioning seat: used for workpiece positioning and chip removal.
3. Workpiece bracket: Two sets of each machine tool, the main function is the workpiece auxiliary support, which is convenient for workpiece clamping, and its working position is lower than the workpiece clamping position.

image002

4. Workpiece holder: It adopts V-shaped iron clasping structure on both sides to clamp the workpiece and resist cutting torque.

image004

5. Oil feeder: used to support the tool and the mast and input coolant to the processing area.

image006

image007

6. Mast bracket: The mast damping sleeve is fixed on the bracket, and replaced with the mast damping sleeve when the mast is replaced. Easy replacement and good repeatability.

image008

7. Mast box: The spindle motor is selected, the power is 60kW, the spindle has a wide range of constant power, and the second gear is used for stepless speed regulation. The speed range is 60-1000r/min.
8. Automatic lubrication device: Lubricate the guide rail and lead screw pair.
9. Mast box feeding system: 7.75kW AC servo motor drive reducer is connected with the output gear-rack mechanism to transmit large torque, good rigidity and high precision.
10. Cooling system: The cooling system adopts the above-ground fuel tank structure. The cutting oil is taken away by the chain-type chip conveyor and then filtered through a filter (coarse filtration)-magnetic separator-fine filtration three-stage filtration treatment.
11. Hydraulic system: Located in the middle of the back side of the machine tool, the main hydraulic components are selected from Taiwan brand.

Product Parameters

 

Item

Parameter(Model GG2120X8000mm)

 

Working scope

Boring hole diameter range

Ф38-Ф200mm

Workpiece length

8000mm

 

 

Boring bar box spindle parameters

Center height

> 350mm

Leading end of cone hole boring bar box Spindle

Ф85mm 1:20

 

The spindle speed range

50-1000r/min
Ac frequency conversion stepless    speed regulation)

Output shaft torque

≥1500N.m

 

Feed parameters

Feed speed range

5-2000mm/min(stepless)

Plate moving fast

3m/min

 

Machining accuracy

Locate the length

0-6m

Workpiece surface roughness of rolling

Ra0.2-0.4μm

Workpiece machining straightness

≤0.05/500 mm

Workpiece machining roundness

≤0.036/200mm

 

 

 

Motor capacity

Boring bar motor power

60KW

Ac servo motor

Feed motor

48NM

Ac servo motor

Hydraulic pump station motor

3KW

Ac motor

Output cooling pump motor power

11KW one set,

7.5KW one set

Automatic chip removal motor power

1.5KW

one set

Magnetic separator motor power

0.75KW

one set

Centralized lubrication motor

0.75KW

one set

 

Others

Head of the biggest pre-tightening force for the workpiece

50KN

The cooling system flow

600L/min

Cooling system rated pressure

0.36Mpa

Magnetic separator flow

600L/min

Hot Tags: combining skiving burnishing machine, China, suppliers, manufacturers, factory
Related Products

24 hours at your service:

dzguanlu@dzguanlu.com

Newsletter

  • Dezhou Guanlu Precision Machinery Co.,Ltd
  • TRY BEST! TO BE NO.1

    Our machines has been sold to the following countries: France, Russia, Serbia, Spain, Singapore, Chile, Peru, Agentina, Mexcio, Venezuela, Bolivia, Algeria, Ecuador, South Africa, Egypt, Indonesia, India, Pillippines, Iran, Iraq, Jordan, Malaysia, Sri Lanka, Bangladesh, Ethiopia, Ukrain, Austrilia, Newsland, Canada, Pakistan, Uzbiekstan, Turkey, UAE, Korea, Japan and so on.

  • QR CODE