General steps to operate a deep hole drilling and boring machine
Deep hole drilling and boring machine is a common machine tool equipment, its ultra high performance has been widely accepted by the vast number of users, but deep hole drilling and boring machine need to pay attention to some important steps in operation.
1. before starting the deep hole boring and boring machine, check whether the sliding surface is clean, the position of the handle is correct, and the lubrication point should be refueling.
2. check the coolant flow when starting the deep hole drilling and boring machine cooling pump.
3. before starting the spindle of the deep hole boring and boring machine, check whether the drill plug is removed or prohibit the start of the spindle.
4. the spindle box, each drill box gearbox lubrication motor should start before starting, must be able to stop the speed conversion after drilling frame.
5. operators should strictly abide by their posts. If abnormal conditions occur, they should stop checking immediately. When receiving the operation command of deep hole drilling and boring machine, first turn on the cooling pump and then open the spindle.
More informations about deep hole drilling and boring machine will be updated soon, please continue to pay attention to our website!
Our machines has been sold to the following countries: France， Russia， Serbia， Spain， Singapore， Chile， Peru， Agentina， Mexcio， Venezuela， Bolivia， Algeria， Ecuador， South Africa， Egypt， Indonesia， India， Pillippines， Iran， Iraq， Jordan， Malaysia， Sri Lanka， Bangladesh， Ethiopia， Ukrain， Austrilia， Newsland， Canada， Pakistan， Uzbiekstan， Turkey， UAE， Korea， Japan and so on.