Main Composition Of Deep Hole Skiving Roller Burnishing Machine
Jun 09, 2018

Main composition of deep hole skiving roller burnishing machine


The application of the deep hole skiving roller burnishing machine can improve the processing efficiency, the processing speed is nearly twenty times the honing, and the application noise of thedeep hole skiving roller burnishing machine is low, no pollution, and the labor cost can be saved. The outstanding performance of the deep hole skiving roller burnishing  machine and the characteristics of his main structure are inseparable. Today, the main structure of the deep hole skiving roller burnishing  machine is explained in detail.

4

The lathe bed part of the deep hole skiving roller burnishing machine is the basic component of the machine tool, and its stiffness directly affects the working performance and working accuracy of the whole machine tool. The lathe bed is made of resin sand and cast with high quality cast iron. It has good appearance and strength, and the layout of the stiffeners is reasonable. The stiffeners have excellent stiffness, anti vibration and cross section distortion ability. The lathe bed adopts split splicing structure, and the guide rail adopts medium frequency quenching grinding process, which makes the machine tool have good wear resistance and accuracy maintenance. The bed guide uses a double flat structure.


The drilling rod box part of the deep hole skiving roller burnishing  machine is the whole structure, the main shaft is driven by the AC spindle motor through the narrow V belt through the variable speed mechanism, the speed range is 3 - 1000r/min, and the main motor is 37/45kw AC spindle motor. Hydraulic two gear stepless speed regulation. The choice of speed can be determined by factors such as workpiece material, hardness, chip breaking and so on.


Feed part: the rear half of the machine tool is equipped with Taiwan high precision ball screw and feed box, which is used for cutting tool feed. The front half of the machine tool is equipped with T screw and feed box for adjusting and clamping the workpiece position.


More information will be updated soon, please continue to pay attention to our website!

Related News

24 hours at your service:

dzguanlu@dzguanlu.com

Newsletter

[[JS_BodyEnd]]