2M2150x6000mm Deep Hole Honing Machine

1.🔎Machine Brief：

1.1 Processing Capacity :

 

Hole diameter range: Φ50~Φ500mm

Max. Honing depth: 6000mm

Max. Workpiece length: 6000mm

 

1.2 ⚙️Machine functions and application:

The expansion and contraction of the honing head is controlled by a servo motor, which can not only achieve constant pressure feed of the honing head but also achieve quantitative feed of the honing head.

The function introduction of constant pressure feed: The total feed pressure remains unchanged, but during the honing process, the roughness of the machined surface continuously decreases, and the contact points between the oilstone (also known as the honing strip) and the surface continuously increase. As a result, the unit pressure exerted by the oilstone on the surface correspondingly decreases, causing the cutting effect of the oilstone to continuously decline. During processing, when encountering high points, it processes in a constant pressure manner, thus preventing a sudden increase in the load of the spindle motor. In the processing, the controllable and uniformly distributed pressure can achieve an extremely excellent processing surface, with the highest precision reaching ra0.2.

Introduction to the function of quantitative feed: The oilstone always forces expansion feed at a predetermined speed. After the honing head enters the hole and rapidly expands to approach the surface of the workpiece, forcing the oilstone to expand will cause a self-sharpening effect. This feed method not only achieves a lower surface roughness but also has the ability to correct the geometric shape error of the correction hole.

The mixed feed mode combining constant pressure feed and quantitative feed can effectively improve the honing accuracy and efficiency.

 

1.3 ⛓️Oil supply mode of honing head : External oil spray , Internal oil feeding

During the honing process, the incoming oil and the incoming oil are respectively delivered to the workpiece through the oil pump, among which the incoming oil directly enters through the workpiece wall. The incoming oil flows out along the honing tool through the gaps inside the tool bar, allowing the honing oilstone to fully contact for better lubrication and cooling effects. It also helps to clean the iron filings after processing in a timely manner and improve the surface processing quality.

 

1.4 🔧Machine main structure:

Machine main parts：

Casting machine bed, honing box, 2sets workpiece carrier, honing bar support rest, Rack and pinion, coolant system,SIEMENS PLC control system, electric cabinet and so on.

 

 

 

 

 

 

 

⚒️CNC axis:

Z1 axis: The longitudinal feed movement of the honing box (honing head reciprocating movement), the servo motor drives the rack and pinion mechanism through the reducing mechanism.

Z2 axis: Control the expansion of honing head, the servo motor drives the ejector pin to move axially through reducing mechanism.

 

🛠️Honing box:

It is used to drive the tool to rotate, and the tool speed is steplessly adjustable.

The servo motor drives the main shaft to rotate through a gear reduction box. The gears are precisely ground and the tooth surfaces are treated with high-frequency quenching, with a tooth surface hardness of HRC48-52. This enables the gears to achieve high strength, high hardness, high wear resistance and high fatigue limit, and can withstand relatively large alternating loads and impact loads.

The main shaft is supported by a combination of cylindrical roller bearings and thrust ball bearings. The main shaft has high precision and can withstand relatively large axial and radial forces.

In order to increase the service life of gears and bearings, lubricating oil is adopted for lubrication.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

🔩Coolant system:

Provide lubricating fluid for the cutting tools.

It is mainly composed of pumps, paper bag filters, magnetic roller filters, oil tanks, etc.

Two oil supply methods, external oil injection and internal oil intake, can be provided for the cutting tool, and the conversion can be selected on the operation station.

It can detect the pressure, flow rate, liquid level and temperature of the cooling system in real time.

The cooling system is equipped with an oil temperature chiller to enhance processing efficiency and quality.

 

 

 

 

 

 

 

 

 

📏Machine main technical parameters:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If you are interested in our machines, please contact me😎.

Wendy

📞WhatsApp：+86 15550468204

📧Email：deepholedrilling@dzguanlu.com

 

Hot Tags: 2m2150x6000mm deep hole honing machine, China, suppliers, manufacturers, factory, customized, price, cheap, company, cost, for sale