CNC Gundrilling Machine ZSK2102*1000

1.1 Processing Capacity :

Drill diameter range: Φ3~Φ20mm

Max. Drill depth :1000mm

Max. Hole length-diameter ratio : 100:1

Workpiece OD range: Φ15~Φ100mm

1.2 Gun drill drilling mode, single spindle structure, suitable for the machining of coaxial holes on shaft parts;

1.3 Relative rotation of tool and workpiece during machining, with tool feed. For the machining of same-axis holes in shaft-type parts.

1.4 Workpiece clamping

One end of the workpiece is clamped with a three-jaw self-centering chuck, and the other end is positioned by a cone disc.

The hydraulic system controls the axial movement of the headstock spindle.

1.6 CNC system : GSK

Adopt the servo main motor driving the spindle to rotate through synchronous belt and synchronous belt wheel, speed stepless could be realized , The max. speed of main spindle is 5000r/min; the spindle drive is front-loaded, which is good for the protection of the main motor and convenient for tool change.

1.8 Headstock:

Drive the workpiece rotation, the speed is constant 117r/min; the spindle can move axially under the control of the hydraulic system, used for tightening or loosening the workpiece. The spindle drive is front-mounted, which is convenient for loading and unloading workpieces and helps to protect the main motor.

Adopting the structure of servo motor driving ball screw, the tool feed can realize stepless speed regulation.

1.10 Drill bar support rest : 2sets , Support drill bar .

1.11 Coolant system :